| Anmol Chemicals is the pioneer manufacturers of Cupric Chloride Copper II Chloride CuCl2, Cuprous Chloride Copper I Chloride CuCl, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Cupric Chloride Copper II Chloride CuCl2, Cuprous Chloride Copper I Chloride CuCl made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Cupric Chloride Copper II Chloride CuCl2, Cuprous Chloride Copper I Chloride CuCl is in these pages. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal |
------------
Cupric Chloride Copper II Chloride CuCl2 Anhydrous Dihydrate, Cuprous Chloride Copper I Chloride CuCl USP & Reagent Grade Manufacturers, Exporters
Cupric Chloride Copper II Chloride CuCl2 SDS GHS of Manufacturers
Cuprous Chloride Copper I Chloride CuCl SDS GHS of Manufacturers
Copper II Chloride or Cupric Chloride Dihydrate: CAS Number: 10125-13-0
Copper II Chloride or Cupric Chloride Anhydrous CAS Number: 7447-39-4
Copper I Chloride or Cuprous Chloride CAS Number 7758-89-6
Specifications of Copper II Chloride or Cupric Chloride Dihydrate Commercial Pure
Assay as CuCl2 2H2O: 99% minimum.
Appearance: Green to Blue Green
Total Copper as Cu: 36.9% minimum.
Nitrate as Cu(NO3)2: 0.1% maximum.
Moisture: 3% maximum.
Free HNO3: 0.05 % maximum.
Iron as Fe: 0.005% maximum.
pH of 5% : 3 to 4
Matter Insoluble in H2O: 0.01% maximum.
Specifications of Copper II Chloride or Cupric Chloride USP Grade
CuCl2-2H2O -- 170.48
Copper chloride dihydrate.
Copper(2+) chloride dihydrate CAS 10125-13-0
Anhydrous 134.45 CAS 7447-39-4
Cupric Chloride contains not less than 99.0 percent and not more than 100.5 percent of CuCl2, calculated on the dried basis.
Identification: A solution (1 in 20) responds to the tests for Chloride and for Copper.
Loss on drying: Dry it at 105 for 16 hours: it loses between 20.9% and 21.4% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 100 mL of water and 2 mL of hydrochloric acid, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and filter through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C, the residue weighs not more than 1.0 mg (0.01%).
Sulfate: (0.005%).
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.005%.
Limit of nickel: The limit is 0.01%.
Specifications of Cupric Chloride Dihydrate Analytical Reagent Grade
Copper (II) Chloride Dihydrate
CuCl2-2H2O
Formula Wt 170.48
CAS Number 10125-13-0
| Assay | ≥99.0% CuCl2-2H2O |
MAXIMUM ALLOWABLE
| Insoluble matter | 0.01% |
| Nitrate (NO3) | 0.015% |
| Sulfate (SO4) | 0.005% |
| Calcium (Ca) | 0.005% |
| Iron (Fe) | 0.005% |
| Nickel (Ni) | 0.01% |
| Potassium (K) | 0.01% |
| Sodium (Na) | 0.02% |
Specifications of Anhydrous Copper II Chloride or Cupric Chloride Commercial Pure:
Appearance: Fine Brownish Powder
Assay: 97.00 % (min)
Copper: 45.80%
Cuprous Chloride: 0.05 % maximum.
Free Moisture: 1.00 % maximum.
Water Insoluble: 0.10 % maximum.
Iron:0.1 % maximum.
Sulphate: 0.06 % maximum.
Lead: 10 ppm maximum.
Arsenic: 10 ppm maximum.
Zinc: 20 ppm maximum.
Nickel: 20 ppm maximum.
Specifications of Copper I Chloride or Cuprous Chloride, CuCl Specifications
| Assay as CuCl | 98.00% minimum |
| Cupric Copper as CuCl2 | 0.50% maximum |
| Total Cu | 63.50% minimum |
| Acid Insoluble | 200 ppm maximum |
| Iron | 200 ppm maximum |
| Formula | CuCl |
| Description | Off white to Grayish White Powder |
| Molecular Weight | 99 |
| Melting Point | 422C |
We also offer as under:
Cupric Chloride Copper II Chloride CuCl2 Anhydrous Dihydrate, Cuprous Chloride Copper I Chloride CuCl USP & Reagent Grade Manufacturers at:
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: anmolc@mtnl.net.in
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Georgia, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable 4 March, 2022